System News for Sun Users - The Blog

Available on All M8000/M9000 Servers

A new quad-core 8 thread SPARC64 VII processor operating at 2.88GHz are now available on all M8000/M9000 servers and offered as field-install X-options and upgrades. It includes 6MB L2 cache. The 2.88GHz SPARC64 VII quad-core options can be mixed and matched in the SPARC Enterprise M8000 and M9000 servers with the current SPARC64 VI (2.28 or 2.4GHz) and SPARC64 VII (2.52GHz) options.

(Get More Information . .)

Supported on Sun SPARC Enterprise M8000 and M9000 Servers

There are new higher performance 2.88GHz quad-core SPARC64 VII processor/memory boards (CMU) with a higher throughput memory controller (MAC+) available to order for new Sun SPARC Enterprise M9000-64 servers. The 2.88GHz SPARC64 VII quad-core options can be mixed and matched in the SPARC Enterprise M9000 servers with the current SPARC64 VI (2.28 or 2.4GHz) and SPARC64 VII (2.52GHz) options. Availability of the CMU as field upgrades and on the SPARC Enterprise M8000 and M9000-32 servers are expected to be announced by year’s end.

(Get More Information . .)

Applies to UltraSPARC T2, T2 Plus & Sun SPARC Enterprise M4000, M5000, M8000, M9000 Servers

Sun is retiring two different products: the 73 GB, 10,000 RPM, 2.5 inch SAS disk drives for UltraSPARC T2 and T2 Plus Chip Multithreading (CMT) servers and the 73GB disk drive options on Sun SPARC Enterprise M4000, M5000, M8000, and M9000 servers.

(Get More Information . .)

Up to 4 Terabytes With New 8GB Memory DIMM

Sun SPARC Enterprise M8000 and M9000 Data Center Servers now offer double the maximum memory capacity with a new 8GB DIMM memory option. Using the new higher density memory CPU/Memory Boards (CMUs) enables customers to double the maximum system memory in the SPARC Enterprise M8000 and M9000 Servers and up to 4 Terabytes of system memory in the largest M9000-64 configuration. New Sun SPARC Enterprise M8000/M9000 CMU boards with the new 8GB DIMM memory options are available now for both new factory configured systems and can be ordered separately and added to existing systems.

(Get More Information . .)

The latest version of the XCP firmware , XCP 1071 contains fixes for the following Change Requests:

• 6685379 XSCF changed from XCP1050 so that console logs out from Solaris
• 6661840 Description of setdscp/showdscp is unclear
• 6667626 adduser man page should change the maximum user name length to 31 characters
• 6654373 Man page should designate when sendbreak won’t work
• 6668614 Undocumented platform power cycle is required before SPARC64-VII can be added.
• 6685374 Power-on failed after XCP was updated to XCP1070 and Jupiter CPU was installed
• 6681287 DBS got an error(QA-DC-0973)
• 6655686 XCP updates needed to support new FF I2C fan controller chip
• 6706348 show_scf_trace should report information about begin and end date/time of each region and trace file
• 6660264 There needs to be two types of XSCFU serial I/F ereport.
• 6571840 panel_dongle status needs to be logged
• 6664046 snapshot should collect ‘getflashimage -l’
• 6666291 Snapshot needs to collect the SunMC logs for trouble shooting.
• 6677063 RFE: Add “fmstat -a -m emailprv” to snapshot
• 6545482 XSCF archiving generates a huge amount of data
• 6667088 check xscf#0-if’s IP and xscf#1-if ’s ip are on same subnet.
• 6683763 missing DB files results in SCF unbootable.
• 6615720 Customers are requesting ability to restore a system to factory default state
• 6566540 Executing shownvram w/ /MBU_B/FPGA” on FF system shows OBP instead of FPGA.
• 6630959 BUI changes for user name restricted to less than 32 characters
• 6677958 FMA-’showlogs error’ discrepancy reg degraded component
• 6645828 “Could not write FRU-ID status” is detected
• 6546593 WANboot should not reflect packets
• 6561957 OBP bge ethernet driver needs performance improvement when loading a big file (wanboot 108 MB)
• 6634974 Incorrect Error reported on nvramrc CRC Error
• 6634980 Possible Data corruption when using NVRAMRC kill or yank
• 6675519 Problem with LSB Degradation
• 6684123 On OPL OBP can cause OBP to Display incorrect information

Detailed product notes are available for the M4000/M5000 and M8000/M9000.
This firmware update is recommended for all customers with M series servers.

Owners of Sun SPARC Enterprise M4000/M5000/M8000/M9000 servers whose systems need to be updated with the latest XCP Firmware or possibly just need a reinstall of the firmware, should visit the Sun Download Center, which recently released XCP 1071.

Fixes incorporated within this release as described by Bruce Hill, Sr. Manager, SPARC Platform Software Release Engineering:

• 6685379 XSCF changed from XCP1050 so that console logs out from Solaris
• 6661840 Description of setdscp/showdscp is unclear
• 6667626 adduser man page should change the maximum user name length to 31 characters
• 6654373 Man page should designate when sendbreak won’t work
• 6668614 Undocumented platform power cycle is required before SPARC64-VII can be added.
• 6685374 Power-on failed after XCP was updated to XCP1070 and Jupiter CPU was installed
• 6681287 DBS got an error(QA-DC-0973)
• 6655686 XCP updates needed to support new FF I2C fan controller chip
• 6706348 show_scf_trace should report information about begin and end date/time of each region and trace file
• 6660264 There needs to be two types of XSCFU serial I/F ereport.
• 6571840 panel_dongle status needs to be logged
• 6664046 snapshot should collect ‘getflashimage -l’
• 6666291 Snapshot needs to collect the SunMC logs for trouble shooting.
• 6677063 RFE: Add “fmstat -a -m emailprv” to snapshot
• 6545482 XSCF archiving generates a huge amount of data
• 6667088 check xscf#0-if’s IP and xscf#1-if ’s ip are on same subnet.
• 6683763 missing DB files results in SCF unbootable.
• 6615720 Customers are requesting ability to restore a system to factory default state
• 6566540 Executing shownvram w/ /MBU_B/FPGA” on FF system shows OBP instead of FPGA.
• 6630959 BUI changes for user name restricted to less than 32 characters
• 6677958 FMA-’showlogs error’ discrepancy reg degraded component
• 6645828 “Could not write FRU-ID status” is detected
• 6546593 WANboot should not reflect packets
• 6561957 OBP bge ethernet driver needs performance improvement when loading a big file (wanboot 108 MB)
• 6634974 Incorrect Error reported on nvramrc CRC Error
• 6634980 Possible Data corruption when using NVRAMRC kill or yank
• 6675519 Problem with LSB Degradation
• 6684123 On OPL OBP can cause OBP to Display incorrect information

Sun Docs offers more information on the M4000/M5000 and M8000/M9000.